Autologin Settings

Use the Autologin tab in the Host Profiles dialog box to configure autologin parameters for the mobile device, such as a user name and password. This tab will present different options depending on the emulation type.

The following list describes configurable options on the Autologin tab if you are using VT/HP emulation:

  Prompts CFG in Terminal Responses
Name

Indicates the user name prompt that the host system uses.

Possible Values: 0 - 60 alpha-numeric characters

Default Value: login

Indicates whether users should configure the response to the login prompt at the mobile device.

Possible Values: <Enabled> <Disabled>

Indicates the response that the mobile device should send to the login prompt.

Possible Values: 0 - 30 alpha-numeric characters

Password

Indicates the password prompt that the host system uses.

Possible Values: 0 - 60 alpha-numeric characters

Indicates whether users should configure the response to the password prompt at the mobile device.

Possible Values: <Enabled> <Disabled>

Indicates the password that the mobile device should send to the host system at the password prompt.

Possible Values: 0 - 30 alpha-numeric characters

Command

Indicates the command prompt that the host system sends to the TE Client after the login is complete.

Possible Values: 0 - 60 alpha-numeric characters

Indicates whether users should configure the response to the command line prompt at the mobile device.

Possible Values: <Enabled> <Disabled>

Indicates the command that the mobile device should send the host system at the command prompt.

Possible Values: 0 - 30 alpha-numeric characters

The following list describes configurable options on the Autologin tab if you are using IBMHOST emulation:

User Name

The user name the Client should use when connecting to the host.

Password

The password the Client should use when connecting to the host.

Program/Procedure

A program/procedure that should run when the Client connects.

Menu

The name of the menu you want displayed when the Client connects.

Current Library

The name of a library the Client should navigate to when it connects.

Note:   When configuring 5250 autologin for the AS/400, the QRMTSIGN system value must be set before the autologin will function properly. Use WRKSYSVAL QRMTSIGN and change the parameter to *VERIFY. This setting verifies that the user has access to the system, allowing the user to bypass the sign-on. The default is *FRCSIGNON.